Improper construction of the joint between the lens and housing of halogen bulb type headlamps
Description of the defect
Due to an inappropriate structure of the lens and housing joint of halogen bulb type headlamps, the rubber seal on the bonnet may press against the lens, causing the sealant of the joint to partially peel off. As a result, water may enter the headlamps in the event of rain, etc., and the inside of the headlamp lenses may fog up if there is a large temperature difference between the outside air and the inside of the headlamps.
Improvement details
Add a stop fitting to the headlamp lens and housing joint.
Chassis number of target vehicles
CL8-1100006～CL8-1100661
CL8-5100001
CL7-3100005～CL7-3105831
CL7-5100009
Accord Wagon
CM1-1000006～CM1-1000725
CM1-5000001～CM1-5000004
Excludes vehicles equipped with discharge type (HID) headlamps.
Automotive maintenance cannot determine the cause based on symptoms alone.
Be sure to perform diagnosis and inspection before determining the cause of the failure.
