Auto maintenance info– category –

Replace the fan controller with a countermeasure Description of defect In radiator fan controllers, cracks may occur in the solder section during use due to improper soldering of the IC leads. This may result in non-operation or continuo...

Replace the inlet manifold with a countermeasure Description of defect In diesel engine vehicles, the incorrect position of the pressure outlet nipple for the pressure sensor in the inlet manifold may cause soot to accumulate on the nipp...

Replace the ETV with a countermeasure Description of defect On some prime movers, the magnets of the torque motor of the electronically controlled throttle valve (ETV) may peel off due to an inadequate fixing method.In addition, the idle...

Replace the ETV with a countermeasure Description of defect On some prime movers, the magnets of the torque motor of the electronically controlled throttle valve (ETV) may peel off due to an inadequate fixing method.In addition, the idle...

Replace the ETV with a countermeasure Description of defect On some prime movers, the magnets of the torque motor of the electronically controlled throttle valve (ETV) may peel off due to an inadequate fixing method.In addition, the idle...

Update the engine ECU programme to the countermeasure. Replace spark plugs Description of defect (1) Due to some inappropriate ignition timing control programmes (engine ECU) in the low idle speed range, idle speed may become unstable an...

Replace with a countermeasure part Description of defect As there is no clearance between the brake pipe for the front wheels of the braking system and the bump stopper of the buffer system, there is a risk of contact between the brake p...

Update the control programme of the engine ECU to countermeasures Description of defect Due to a part of the ignition timing and fuel injection control programme being inappropriate in the prime mover control computer (engine ECU), if th...

Update the engine ECU programme to the countermeasure Description of defect In the control computer of the prime mover (engine ECU), some air volume control programmes are inappropriate, so when power steering is operated during idling, ...

Replaced with countermeasure components. Programme updated to improved specifications Description of defect 1) Due to insufficient wear resistance inside the prime mover's throttle position sensor (TPS), if contact resistance increases d...