Skyline R32 Power Steering Rack Repair Kit – Type 1 Kit For Rack P/N 49361-05U00

$244.64

This Type 1 power steering rack repair kit for Nissan Skyline R32 GT-R.
Includes new internal seals and O-rings only.

Rack boots are not included; suitable for vehicles where existing boots are in good condition or have been replaced.

Designed for repairs where cylinder end cover can be reused.

Availability: 1 in stock

What This Kit Includes in Type 1

Nissan Genuine Parts Product Contents:

  • Spacer (L/R)
  • Plates, lock side rod (L/R)
  • Pins (L/R)
  • Seal kit #1
  • Seal kit #2
  • Seal
  • Rings
  • Cap, rear cover
  • Seal, O-rings #1
  • Seal, O-rings #2
  • Seal, O-rings #3

Not Included

The following genuine parts are not included in this repair kit:

  • Tie Rods (L/R)
  • Tie Rod Ends (L/R)
  • Insulators (L/R)

If you would like these parts to be replaced at the same time as the power steering rack repair, please inform us at the time of inquiry.
If you are using NISMO or other aftermarket parts, please transfer and reuse them as required.

Compatibility

Power Steering Rack Repair Kit for49361-05U00
49001-12U00
Nissan Skyline R32 GT-RModel: BNR32
Years1989-1994
EnginesRB26DTT, RB26DETT
MissionMT
Drive train4WD

Recommended Repairs with This Type 1 Kit

  • Includes new internal seals
  • Suitable for vehicles where rack boots are already in good condition, or have been replaced previously.
  • Allows cleaning and inspection of internal components during disassembly
  • Restores internal seals to maintain steering performance and reduce leaks, noise, and heavy steering

Why Are Rack Boots Not Included with This Type 1 Repair Kit?

In some cases, vehicles may be equipped with NISMO or other aftermarket tie rods (L/R), and rack boots may be replaced at the same time depending on the setup.

To avoid unnecessary duplication and additional cost, rack boots are intentionally not included in Repair Kit Type 1.

This allows customers to:

  • Reuse existing boots where applicable
  • Install brand-new boots of their choice during the repair
  • Avoid paying for parts they do not need

If you are looking for a repair kit that includes rack boots, please consider Repair Kit Type 3.

Cylinder End Cover Assembly – Important Note for Type 1

  • When removing the cylinder end cover assembly, it is necessary to drill out the staked portion at the end of the gear housing using a 3.0 mm drill bit.
    If the staking is not completely removed, the threads of the cylinder end cover may be damaged during removal.
    For this reason, a spare cylinder end cover assembly is included in Repair Kit Type 2 and Type 4.

  • Repair Kit Type 1 does NOT include a spare end cover assembly.
    This kit is recommended for experienced technicians who are confident reusing the original cylinder end cover assembly.
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Cylinder end cover assembly. 49520-10V06

Important Notice

  • Some internal rack components are discontinued. If internal wear or damage is found, this repair kit cannot address those issues.

  • In particular, the rear housing bearing seal is not available as an individual service part.
    If the bearing or seal is damaged, replacement of the rear housing assembly is required, however this assembly has been discontinued.

Nissan Skyline R32 GT-R BNR32 Power Steering Rack Repair Kit

Repair Kit Type 1

Nissan Skyline R32 GT-R BNR32 Power Steering Rack Repair Kit
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Cylinder end cover assembly. 49520-10V06

Repair Kit Type 2

Nissan Skyline R32 GT-R BNR32 Power Steering Rack Repair Kit
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Boot kit (L/R) 48203-10V25
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Repair Kit
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Boot kit (L/R) 48203-10V25
Nissan Skyline R32 GT-R BNR32 Power Steering Rack Cylinder end cover assembly. 49520-10V06

Common Symptoms of Power Steering Rack

  • Fluid leakage
  • Steering noise
  • Heavier or inconsistent steering feel
  • Unusual vibrations or stiffness

Possible Causes

  • Worn or deteriorated internal seals and O-rings
  • Worn or contaminated internal rack components
  • Low or degraded power steering fluid
  • External factors (hoses, connections, tie rods, rack ends)

How to Check Compatibility

If you do not know the part number, please provide your vehicle’s chassis number, and we will help verify the compatible parts for your car.

Weight 1 kg
Dimensions 22 × 19 × 19 cm
Condition

Scroll to Top