What This Kit Includes in Type 3
Nissan Genuine Parts Product Contents:
- Boot kit (L/R)
- Spacer (L/R)
- Plates, lock side rod (L/R)
- Pins (L/R)
- Seal kit #1
- Seal kit #2
- Seal
- Rings
- Cap, rear cover
- Seal, O-rings #1
- Seal, O-rings #2
- Seal, O-rings #3
Not Included
The following genuine parts are not included in this repair kit:
- Tie Rods (L/R)
- Tie Rod Ends (L/R)
- Insulators (L/R)
If you would like these parts to be replaced at the same time as the power steering rack repair, please inform us at the time of inquiry.
If you are using NISMO or other aftermarket parts, please transfer and reuse them as required.
Compatibility
| Power Steering Rack Repair Kit for | 49361-05U00 49001-12U00 |
| Nissan Skyline R32 GT-R | Model: BNR32 |
| Years | 1989-1994 |
| Engines | RB26DTT, RB26DETT |
| Mission | MT |
| Drive train | 4WD |
Recommended Repairs with This Type 3 Kit
- Includes new internal seals, O-rings, rack boots (L/R)
(If rack boots are not required, Repair Kit Type 1 is also available) - Allows cleaning and inspection of internal components during disassembly
- Restores internal seals to maintain steering performance and reduce leaks, noise, and heavy steering when internal components are undamaged
Cylinder End Cover Assembly – Important Note for Type 3
- When removing the cylinder end cover assembly, it is necessary to drill out the staked portion at the end of the gear housing using a 3.0 mm drill bit.
If the staking is not completely removed, the threads of the cylinder end cover may be damaged during removal.
For this reason, a spare cylinder end cover assembly is included in Repair Kit Type 2 and Type 4. - Repair Kit Type 3 does NOT include a spare end cover assembly.
This kit is recommended for experienced technicians who are confident reusing the original cylinder end cover assembly.
Important Notice
- Some internal rack components are discontinued. If internal wear or damage is found, this repair kit cannot address those issues.
- In particular, the rear housing bearing seal is not available as an individual service part.
If the bearing or seal is damaged, replacement of the rear housing assembly is required, however this assembly has been discontinued.
Repair Kit Type 1
Repair Kit Type 2
Repair Kit Type 3
Repair Kit Type 4
Common Symptoms of Power Steering Rack
- Fluid leakage
- Steering noise
- Heavier or inconsistent steering feel
- Unusual vibrations or stiffness
Possible Causes
- Worn or deteriorated internal seals and O-rings
- Worn or contaminated internal rack components
- Low or degraded power steering fluid
- External factors (hoses, connections, tie rods, rack ends)
How to Check Compatibility
If you do not know the part number, please provide your vehicle’s chassis number, and we will help verify the compatible parts for your car.
